How to Resolve Windows 10/11 Error Code 08×80070035

PC Repair Windows
Angry Woman After Windows Error

Transferring or copying files from one machine to another has been made easier with the use of Network Attached Storage or NAS. You can basically access any file within NAS as long as both devices are located within the same localized environment.

NAS uses its own file sharing protocols, and you need to simply connect to the HomeGroup or WorkGroup network. Once you are connected to the network, you can quickly and easily share content across your network.

However, some Windows users have reported experiencing network-related issues while accessing resources via NAS.

What Is 08×80070035?

08×80070035 is an error that occurs whenever there is a problem accessing a folder or drive on the HomeGroup or WorkGroup network. The message typically reads:

Pro Tip: Run a dedicated PC optimization tool to get rid of incorrect settings, junk files, harmful apps, and security threats that can cause system issues or slow performance.

Free Scan for PC Issues
Compatible with: Windows 10/11, Windows 7, Windows 8

Special offer. About Outbyte, uninstall instructions, EULA, Privacy Policy.

“Windows cannot access <the resource>

Check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify and resolve network problems, click Diagnose.

Error code: 0x80070035

The network path was not found.”

One possible reason why this error occurs is when NetBIOS over TCP/IP is not enabled on your computer. However, other factors could also be at play and cause this problem. This article will show you how to fix error code 08×80070035 in several ways.

How to Fix Error Code 08×80070035

Getting Windows 10/11 error code 08×80070035 can be inconvenient because you won’t be able to access the files that you need, especially if it’s urgent. If you ever come across this error, you can use any of the methods below to troubleshoot it with ease.

But before you do, make sure to optimize your processes and delete your junk files first with an app such as Outbyte PC Repair to avoid further errors.

Method #1: Make Sure Your Drive Is Shared.

It is easy to overlook this one because sometimes we just assume that all drives are accessible in the network. To check if you have sharing enabled on the drive you are trying to access:

  1. Go to the drive you are trying to access and right-click on its icon.
  2. Choose Properties.
  3. Click on the Sharing tab.
  4. If the Network Path says Shared, then don’t do anything else and exit the window. If it says Not Shared, click the Advanced Sharing button below.
  5. Tick off Share this folder and double-check the Share name to make sure it is correct.
  6. Hit the Apply button, then OK to save your changes.

On the desktop, press Windows + R keys to open the Run command. Type in the name of the folder you want to access in the search box, then hit Enter. You should be able to access the folder now.

Method #2: Disable Firewall and Antivirus Software.

Security software can be overprotective sometimes. To rule out your antivirus and firewall as the culprit, disable them temporarily before accessing your target folder. You can disable your antivirus software using its dedicated client.

To disable your firewall, follow these steps:

  1. Go to Control Panel > System & security > Windows Firewall.
  2. On the left-hand menu, choose Turn off Windows Firewall (not recommended) for both the Private network settings and Public network settings.

Once you have your antivirus and firewall disabled, try accessing your target folder again. Don’t forget to switch these security services back on after you’re done.

Method #3: Reset TCP/IP.

This troubleshooting method will reset your computer’s Internet Protocol (TCP/IP) settings to default and can solve most network issues.

To reset TCP/IP, follow the instructions below:

  1. Click Start, and type in CMD in the search box.
  2. Right-click on Command Prompt from the search results, then choose Run as administrator.
  3. Once the Command Prompt window is open, type in the following commands, then hit the Enter key after each line:
    • netsh winsock reset
    • netsh int ip reset
    • ipconfig /release
    • ipconfig /renew

After running these commands, reboot your computer and check if the error still exists.

Method #4: Configure Your IP Address.

If resetting TCP/IP does not fix the issue, you can try configuring your IP address next. To do this:

  1. Go to Start > Control Panel > Network and Sharing Center.
  2. Click Change adapter settings.
  3. Right-click on your Wi-Fi adapter, then choose Properties.
  4. Click Internet Protocol Version 4 (TCP/IPv4), then select Properties.
  5. Click Obtain an IP address automatically.

Method #5: Enable NetBIOS over TCP/IP.

Another way to fix error code 08×80070035 is by enabling NetBIOS over TCP/IP. To do this:

  1. Press Windows + R keys to launch the Run dialog.
  2. Type in ncpa.cpl in the dialog box, then hit the OK button.
  3. In Network Connections, right-click on your network adapter and choose Properties.
  4. Click on the Network tab, choose Internet Protocol Version 4 (TCP/IPv4), and click Properties.
  5. Click the Advanced button.
  6. In the Advanced TCP/IP settings, click on the WINS tab.
  7. Under NetBIOS setting, tick off Enable NetBIOS over TCP/IP.
  8. Click OK.

Restart your computer for the changes to take effect and check if the problem still persists.

Method #6: Reinstall Your Network Adapter Drivers.

If the above fixes don’t work, then you might have a device driver problem. You can uninstall then reinstall the drivers for your network adapter and see if this solves error code 08×80070035. To do this:

  1. Press Windows + X keys to launch the Quick Access Menu, then choose Device Manager.
  2. Click on Network adapters to expand it.
  3. Choose the name of your network adapter, then right-click on it.
  4. Select Uninstall.
  5. Tick off Delete the driver software for this device.
  6. Click OK to proceed.

Restart your computer to complete the process. Windows 10/11 should automatically search for missing drivers and attempt to reinstall it after reboot. But if you want to manually update your network adapter’s driver, just right-click on the adapter’s name in Device Manager, and choose Update Driver Software.


Windows 10/11 error code 08×80070035 is a very common network error that can be caused by a lot of things. It is difficult to pinpoint the exact reason, so what you can do is work down the list of methods above to see which one works for you.

Leave a Reply

Your email address will not be published.